Service Area
Deck Builders in Okotoks, Alberta
Arch & Bow builds composite and pressure-treated decks for homeowners in Okotoks, about 20 minutes south of Calgary. Okotoks runs its own permit process through the Town, and it's checked against a newer building code edition than Calgary's — worth knowing before you assume the rules are the same.
Get a Free Design ConsultationDoes Okotoks use the same deck permit rules as Calgary?
No — the Town of Okotoks requires a permit above 0.61m (2ft), and every application gets a full review against the National Building Code 2023 – Alberta Edition, one edition newer than the 2019 edition Calgary's process cites.
Verified against the Town of Okotoks' Deck Guidelines, 2025 edition, checked August 2026.
What else is different about building in Okotoks?
Buried foundations need to go 1.22m (4ft) deep, and if screw piles are used, Okotoks requires both a site-specific engineering report and a CCMC Evaluation Report before inspection — one more document than Calgary asks for. Setbacks in the Traditional Neighbourhood District run 1.2m from the side and rear property lines, and 3m from the front (6m if there's no rear lane access). In some cases a separate Development Permit is required through Planning Services before the Safety Codes permit is issued — we check for that at the start, not after drawings are done.
Ready to build in Okotoks?
See our Calgary deck builders page for materials, process, and cost ranges — everything there applies the same way in Okotoks, only the permit authority and code edition change. Get a free design consultation.